Taplin Systems
Back to calculator directory

Calculator / Materials & Quantities

Demolition & Waste Calculator

Estimate debris volume and weight, dumpster loads, disposal, hauling, labor, equipment, and total demolition cost.

01 / Inputs

Project assumptions

Change any input to update the result immediately. Calculations run in this browser; inputs are not saved or sent to a server.

Currency changes the denomination only. Enter prices in the selected currency; no exchange-rate conversion is performed.

Demolition job

Materials being removed

Use area and thickness or enter an existing volume. Density is in lb/cu ft; bulking changes debris volume only, not material mass.

Hazardous or regulated materials—including asbestos and lead-containing debris—are excluded. Arrange qualified testing and disposal where suspected.

Result / live estimate

Demolition & Waste Calculator

Currency: USD · Internal planning record, not a customer quote.

Estimated hauling / dumpster loads

1 loads

Demolition type
Interior remodel
Original material volume
20.67 cu ft
Debris volume after bulking
1.09 cu yd
Estimated debris weight
0.53 short tons
Loads required by volume
1 loads
Loads required by weight
1 loads
Controlling loads (larger requirement)
1 loads
Disposal cost
$550.00
Hauling cost
$400.00
Labor hours
24 person-hours
Labor cost
$1,080.00
Equipment cost
$300.00
Estimated direct cost
$2,330.00
Recommended selling price
$3,106.67
Gross profit at target margin
$776.67
Gross margin
25%

Itemized cost estimate

Quantities and direct costs for listed materials and work
ItemQuantityUnitCost (USD)
Disposal by load1loads$550.00
Hauling1loads$400.00
Demolition labor24person-hours$1,080.00
Equipment rental and use1allowance$300.00
Total direct cost$2,330.00

Material volume and weight

MaterialOriginal volumeDebris volumeWeight
Drywall16.67 cu ft0.86 cu yd0.33 short tons
Tile4 cu ft0.22 cu yd0.2 short tons
  • • Dumpster loads use the larger requirement from volume capacity and allowable weight. Material density estimates weight; bulking changes volume, not material mass.
  • • Asbestos, lead-based paint, and other hazardous or regulated materials are excluded. Stop and use qualified testing, handling, and disposal procedures where suspected.
  • • Disposal is priced per load; hauling is priced per required load.

Print a copy for your own review. No account or document purchase is required.

Planning estimate only. Verify dimensions, product data, supplier pricing, labor assumptions, taxes, code requirements, and project conditions before relying on a quantity, bid, or budget. Taplin Systems does not provide engineering, legal, tax, accounting, or financial advice.

Related tools

4 calculators
Contractor field notesHow This Calculator WorksFormula, worked example, assumptions, common pitfalls, and FAQs

Check both debris volume and hauling weight

Different demolition materials have very different densities and bulking factors. Calculate each material separately, sum debris volume and material mass, and use whichever dumpster capacity constraint needs more loads. Ordinary debris rates must not be used for hazardous or regulated waste.

Debris, mass, and dumpster requirements

Original volume = area × thickness, or entered volume. Debris volume = original volume × bulking factor. Weight = original volume × density. Loads = max(ceiling(debris volume ÷ volume capacity), ceiling(weight ÷ weight allowance)).

Worked example

A 300 sq ft concrete slab at 4 inches thick contains 100 cu ft. At 150 lb/cu ft, it weighs 15,000 lb, or 7.5 short tons. A 1.5 bulking factor produces 5.56 cu yd of debris. A 10 cu yd dumpster with a 4-short-ton allowance needs one load by volume but two by weight, so use two loads.

Assumptions and common pitfalls

  • Bulking increases loose volume, not material mass.
  • Dumpster capacity and weight allowance must come from the hauling provider.
  • Asbestos, lead-containing waste, and other hazardous materials are excluded.

Frequently asked questions

What is a bulking factor?

It is loose debris volume divided by original in-place material volume. A factor of 1.5 means 50% more volume after demolition. It does not increase the estimated weight.

Which ton unit does the calculator use?

Imperial mode uses US short tons of 2,000 pounds. Metric mode uses metric tonnes of 1,000 kilograms. The output labels identify which one applies.

Are disposal and hauling the same cost?

No. Disposal can be priced per weight or per load, while hauling is separately priced per required load. Check supplier inclusions to avoid counting a bundled service twice.

Free contractor updates

Get practical contractor guides

No account required. Get occasional guides, calculator updates, and news about new tools after confirming your email.

New signups receive one confirmation email. We send no marketing updates unless you confirm.